J'S RACING FL5 HYPER intercooler
A must-have item for FL5 users!!!
High performance intercooler is finally here!!!
The performance of the original FL5 intercooler cannot keep up with the amount of heat generated, so even in full normal conditions, the intake air temperature reaches 50-60℃ in the high rotation range of 6000RPM or higher.
*At an outside temperature of approximately 25℃as the main cause
・Because it is a turbo and has high output, the amount of heat generated by the turbine etc. is extremely large.
・Insufficient cooler core capacity and fin problems
・Difficulty letting air flow out when driving- Heat does not flow easily in the piping and intercooleretc. can be mentioned.In addition to engine cooling measures such as the thermostat, sports coolant, and aero parts, increasing the intercooler capacity = increasing the heat exchange rate and improving the turbine flow speed will result in stable output in the high rotation range and a significant increase in output. It has become possible to realize this.
J'S RACING started joint development with DRL (Daiwa Radiator Manufacturing Co., Ltd.) to develop intercoolers.
In addition to the output test using Dynapack, we also conducted actual driving tests on circuits and streets, and adjusted the fitting, resulting in a product that can be replaced with a genuine product without any major modification.As a result, we have achieved a cooling effect of approximately 5℃ or more at the minimum intake air temperature and approximately 15℃ or more at the maximum intake air temperature under full normal conditions! ! !
In addition, by making it lightweight, we minimize the impact on overall driving performance by avoiding as much weight as possible in the front overhang, where the intercooler is mounted.
Compatible with genuine turbines as well as big turbine kit replacement cars.
*The power graph in the image was measured with an intercooler and FL5 HYPER-ECU option for intercooler (N-L5-ICR).
*A stencil plate with the J'SRACING logo is included. If you would like the J'SRACING logo on the front, please spray paint using a stencil plate.
*Two intercooler gaskets are included.